Owner's Manual

5)
SET THE TILT ANGLE
– Once the speaker has nested securely on the pivot bolt, slide the second
M6-60L bolt into one of the holes in top of the wall bracket to set the angle.
5a) TILT ANGLES
-- The bracket allows for +/-15 degrees of tilt.
5b) PRE- SET ANGLES and CONTINUOUSLY VARIABLE ANGLE
-- The bracket has through
holes for mounting angles of +/- 15 degrees in 5 degree increments. There is also a slot above the
holes for continuously variable adjustment. The pre-set angles are recommended for accurate
aiming.
5C) SECURE THE ANGLE SETTING
-- Once the angle has been chosen re- tighten both bolts
with hardware provided.