Owner's Manual

4)
SLIDE SPEAKER WITH
SPEAKER BRACKET
ONTO
WALL BRACKET
Make sure the
PIVOT BOLT
is installed in-place in the
WALL BRACKET.
It consists of the M6-60L
bolt with lock washer and flat washer on the head (as shown in DETAIL “A”, below) and secured in
place with flat washer, lock washer and M6 nut. Leave the nut loose (do not tighten).
Once the wall mount has been attached to the wall and speaker mount has been attached to the
speaker, slide the speaker forward so that the
SPEAKER BRACKET
engages into the
WALL
BRACKET
, dropping the hook slot of the
SPEAKER BRACKET
onto the pivot bolt (which will already
be installed loosely in the
WALL BRACKET
).
DETAIL “A”
PIVOT BOLT Location