Owner's Manual

WALL MOUNTING
Note that the BRACKET ASSEMBLY consists of a
SPEAKER BRACKET
and a
WALL BRACKET.
1)
RUN WIRING
-- Run the wiring from the power amplifier to the location desired for mounting the
JBL CBT Loudspeakers.
2)
ATTACHING WALL BRACKET TO WALL
-- Using a level to ensure that the
WALL BRACKET
is
straight, secure the
WALL BRACKET
to the wall. Be sure to use the appropriate wall anchors for
attaching the bracket. Use all four screw holes for maximum integrity and safety. Be sure that the
slot feature is at the top.
Hardware for attaching
WALL BRACKET
to wall is not included.