Owner's Manual

II
Control®
6SP
IT
Compact
Full-Range
Pendant
Loudspeaker
with
RBI
Professional
Series
Key
Features:
~
JBL's exclusive conical Radiation Boundary
Integrator•
(RBI) technology provides
consistent and wide
120°
coverage
of
the
li
stening area.
~
Coaxial design featuring
130
mm
(5\4
in)
woofer and
20
mm
(%
in) soft-dome tweeter.
~
Hanging hardware with 4.5 m (15 foot)
galvanized steel cable and easy to adjust
clamp.
~
Stylish design, available
in
black
or
white
(-WH).
~
UL
listed (speaker
and
hanging cable system).
~
8
ohm
and
70V/100V
operation.
Applications:
The Control 65P/T
is
a compact full-range,
two-way pendant-type loudspeaker that provides
superb
sound reproduction
and
very consistent,
wide coverage for rooms with
open
architecture
ceilings and other locations where a
pendant
form factor
is
desired.
JBL
's patent-pending Radiation Boundary
Integrator•
(RBI) technology, adapted from the
groundbreaking
VERTEcTM
Series
of
line array
loudspeakers,
de
li
vers consistent coverage
of
the
li
stening area. Combining a large
200
mm (8 in)
diameter waveguide w
ith
low-frequency
projection apertures, the two coaxia
ll
y-mounted
drivers provide a seamless integration
of
coverage, resulting
in
extremely
even
pattern
control and coverage
whe
re
all
listeners hear a
consistent, high-fidelity
sound
quality. The wide
120°
coverage pattern allows for the use
of
fewer speakers, reducing the cost
of
the
installed system without sacrificing performance.
Exce
ll
ent
sound
quality
coup
l
ed
with stylish
design and easy installation makes the Control
65P/T ideal for a wide variety
of
applications
in
cluding reta
il
, restaurants, hotels, casinos,
fitness centers, convention centers, exhibit
spaces, conference rooms, atrium
s,
museums,
transit centers
and
ot
h
er
open-ceiling
applications.
The Control 65P/T includes a single-point
mounting system for easy and secure suspension
in
open-ceiling
app
lications.
Two
complete
hanging cable systems are included, providing
bot
h main and safety suspension cables. Include
are extra-l
ong
4.5 m (15 foot) high tensile
galvanized steel wire rope having spring clips
for the loudspeaker
end
of
the cable and UL
listed cable fasteners for infinitely adjustable
suspension height.
The system's
130
mm
(5\4
in) low-frequency
driver features a polypropylene-coated
cone
and
25
mm
(1
in)
copper
voice co
il
with vented
fiberglass resin coil-former for high
power
handling and improved long-term reliability. The
coaxia
ll
y-mounted
20
mm
(3,4
in) textile soft-
dome
high fr
equency
driver features internal
damping for smooth extended response, along
with
an
aluminum voice coil former and
neodymium magnei assembly with ferro-fluid
cooling, for high-fidelity
sound
quality with
enhan
ced
long-term
sound
lev
el
capability.
The Control 65P/T contains a high-quality
60
Watt
multi-tap transformer for use
on
70V
/100V
distributed loudspeaker lines. and
is
switchable
for 8-ohm voice-coil direct operation.
houro-style
clip-in connectors allow for easy
wirin
g.
For protected
outdoor
applications.
rubber
bo
ots are included to cover the input
connectors, and an optional terminal cover
is
available for harsher
lOcations.
Shown
with
included
grille
removed
Specifications:
System:
Transducer:
E
nclo
s
ur
e:
Frequency Response (-
10
dB)':
55
Hz-
20kHz
Frequency Range (±3 dB)': 78 Hz - 18 kHz
Power Capacity':
75
Watts
Continuous
Pink
Noise Power
(w
it
h 300
Watts
peaks)
150
Watts
Continuous
Program Power
Nominal Sensitivity: 86 dB
Nominal Coverage Angle':
120° (
+
20°/-1 0°)
Directivity
(Q)':
5.3
Directivity
Index
(
01)
':
7.2 dB
Rated Maximum
SPL
@ lm:
105
dB continuous pink noise,
Ill
dB peak
Rated Impedance: 8 ohms
Transformer Taps:
70V:
60W,
30W,
15W
&
7.5W
IOOV:
60W,
30W,
1
5W
Transformer Insertion
Loss:
0.5
dB@
7.5
W,
0.5
dB@
15
W,
0.6
dB@
30
W,
0.7
dB@
60
W
LF
Driver: 130 mm
(51'4
in) polypropylene-coated
paper
with pure butyl rubber
surround,
25
mm
(1
in)
copper
voice coil, vented fiberglass res
in
voice coi l-former
HF Driver:
20
mm
('!'
in) textile soft-dome, n
eodym
ium magnet assembly,
ferro-fluid
cooling,
aluminum voice co
il
former
Enclosure Material: High impact
po
lystyrene
Gr
ill
e:
Zinc-plated steel grille with powder-coat finish, foam backing
(removable for painting)
Environmental: Exceeds
Mil
Spec 810 for humidity,
sa
lt spray, temperature
&
UV.
IP4
4
capability per I
EC
529 - splashproof rating.
TerminaLion:
Two
removable locking euro-block 2-pin connectors with screw-
down
terminals
for
bare
wire. Connectors paralleled for input
and
loop-thru. Max. wire
12
AWG
(2.5 mm2). Rubber terminal covers
included.
Suspension:
Two
identical suspension systems
(o
ne
as
main suspension cable
and
the
other
as safety cable), each consisting
of
4.5 m
(15ft)
long
2 nun (0.077
in
) high-tensile galvanized-steel wire
rope
suspension
cable with spring-clips for clipping
onto
the loudspeaker bracket
and
Gri
pp
l
e'"
brand adjustable-height cable fasteners for
infi
nitely
adjustable height. Cables have
SWL
rating
of
45
kg (99
I
b).
Safety Agency Ratings: Spea.ker listed
per
ULJ480, transformer r
eg
istered per
UL1876.
In
accordance with IEC60849/ EN60849. Suspension system and
Gripple'-brand cable fastener listed
per
ULI598
and
UL2239,
TUV,
and
CSA
Class 3426-01
&
Class 3426-81
Dimensions:
234
mm (9.3 in) diameter x 259 mm (10.2 in) height to top
of
cabinet.
279
mm (
11.0
in)
to
top
of
suspension bracket.
Net
Weight
(ea): 3.7 kg (8 lbs)
Sh
ipping Weight
(pair): 8.7 kg (19 lbs)
llnclud
ed
Accessories: Two suspension cable systems (see
"Suspension",
above), two 2-pin
removable locking
euro-block
connectors,
two
rubb
er
covers for
euro-b
l
ock
connectors.
Optional Accessories:
MTC-PC60
top
pane
l
I
terminal cover
Color
s:
Available
in
black or white
(-WI!).
Paintable.
' Full-space (suspended)
l
Continuous
Pink
Noise
ldting
is
IEC-shaped pink noise with
a
6 dB
p<:ak-to-average
crest
factor for
100
hours
continuously. Continuous
Program
power is
a conservat
iv
e
express
ion
of
the
~ystem's
ability
to
handle normal speech
and
music
program material and
is
defined
as
3 dB
alx>ve
the
Continuous
Pink
Noise rating.
·
1
Full-space (suspend
in
free
air). average 1
kHz
to
10 kHz.
JBL
continually engages
in
re~arch
related
to
product improvement Changes introduced into existing products
vJithout
notice are
an
expression
of
that
philosophy.