Instructions

OK
TOOL
EARTHING FUSE
AUX
USE ONLY WITH A 250 V FUSE
A
B
C360-001
C360-003
C360-007
C360-002
C360-004
C360-006
OK
TOOL
EARTHING FUSE
AUX
USE ONLY WITH A 250 V FUSE
A
B
C360-001
C360-003
C360-007
C360-002
C360-004
C360-006
OK
TOOL
EARTHING FUSE
AUX
USE ONLY WITH A 250 V FUSE
A
B
C360-001
C360-003
C360-007
C360-002
C360-004
C360-006
OK
TOOL
EARTHING FUSE
AUX
USE ONLY WITH A 250 V FUSE
A
B
C360-001
C360-003
C360-007
C360-002
C360-004
C360-006
OK
TOOL
EARTHING FUSE
AUX
USE ONLY WITH A 250 V FUSE
A
B
C360-001
C360-003
C360-007
C360-002
C360-004
C360-006
Cleaning Solder Collector
1. Remove the filter before cleaning the solder
collector.
3. Use the cleaning brush (ref. 0008297) to
clean the solder collector inside or replace it
for a new one.
2. Take out the solder collector with the metal
solder retention.
4. Insert the solder collector with the metal
solder retention into the heating element.
Note: For this operations, turn off the station or disconnect the tool and wait until the tool
temperature drops to room temperature.
5. Mount the filter onto the tool.
www.jbctools.com
11