Instruction Manual

Adjustable Stand Cable Collector (Ref. CC1001)

Adjust the tool stand to suit

your work position.

Tip Cleaner

Select the option to suit your needs and improve the thermal transfer of the tip.

Splashguard

Ref. 0 017576

When using the brass wool, it prevents

splashing of solder particles.

Antisplash Membrane

Ref. CL7882

Prevents splashing and keeps

the work area clean.

Brass Wool

Ref. CL6210

Very effective cleaning

method. Leaves a

small layer of solder

on the tip preventing

oxidation between

cleaning and rewetting.

Wiper

Ref. CL7984

A temperature resistant receptacle for removing

excess solder by gently tapping or wiping.

If the tip is very dirty,

JBC recommends first

cleaning it with the wiper

to remove excess solder.

The cable collector keeps the cable away from the work area and

prevents that the weight of the cable from disturbing the operator

while soldering.

Insert the cable into the clip

and then insert into the cable

collector. Do not leave the

cable longer than necessary

to reach the work area freely.

The cable collector is flexible.

It accompanies and adapts

to the movements during the

soldering process.