Manual

Corporate Ofce: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 • FAX 909.599.6424

Installation Instructions

and Warranty Information

Part No. Application

6811S 08-2010 Pontiac G8 6.0L

6812S 2010 Chevrolet Camaro 6.2L

6813S 2010 Chevrolet Camaro 6.2L

WARNING: These headers are legal for Off Highway use (except in California or states that have adopted Cali-

fornia emission standards) or Racing use (which may never be used on a Highway), or for use on pre emission

controlled motor vehicles/motor vehicle engines (pre 1974 domestic vehicles certied to California standards, pre

1974 domestic vehicles certied to Federal standards and all pre 1974 Foreign vehicles) Only.

Read all instructions carefully before attempting installation.

Rev. 04/09

Summary of content (4 pages)

PAGE 1
Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 • FAX 909.599.6424 Installation Instructions and Warranty Information Part No. 6811S 6812S 6813S Application 08-2010 Pontiac G8 6.0L 2010 Chevrolet Camaro 6.2L 2010 Chevrolet Camaro 6.
PAGE 2
PerTronix© thanks you for choosing JBA HEADERS, the best fitting, highest quality header on the market. In order to realize the full potential of our good fit, please read and understand these instructions completely prior to starting work. Check to make sure you received the proper parts for your application. The header number will be stamped on the engine flange. If you are unsure you have received the proper parts call before you start work.
PAGE 3
1. Place vehicle in a location where the floor is solid and flat, with adequate lighting. Do not attempt to work on a hot engine. Heat causes metal to expand and makes removal of fasteners difficult at best. Disconnect the battery cables from the battery. Raise the front of the vehicle to obtain adequate access to the bottom exhaust manifold flanges. Use large-base jack stands to support the vehicle. Do not rely on the jack! Block the tires to prevent the vehicle from rolling off the jack stands. 2.
PAGE 4
Parts List: (1) Driver ’s Side Header Assembly (1) Passenger ’s Side Header Assembly (2) Head flange gaskets (12) 8mm-1.25 x 25mm Header fasteners w/lock washers (Torque to 13 ft/lbs) (1) O2 Extender (G8) (2) O2 Extender (Camaro) (1) W0812 ignition wire (2) Stacker Flanges (2) V-Band Clamps LIMITED ONE YEAR WARRANTY All JBA HEADERS and exhaust products are guaranteed, to the original purchaser, to be free of defects in materials and workmanship for one year.