ENGLISH USER MANUAL OPERATION MANUAL Thank you for buying this JB Systems® product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit.
ENGLISH USER MANUAL SAFETY INSTRUCTIONS: CAUTION: To reduce the risk of electric shock, do not remove the top cover. No user-serviceable parts inside. Refer servicing to qualified service personnel only. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
ENGLISH USER MANUAL • Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering from epilepsy. OVERHEAD RIGGING • Important: The installation must be carried out by qualified service personal only. Improper installation can result in serious injuries and/or damage to property.
ENGLISH USER MANUAL 11. Eye bolt for safety cable. 12. Magnetic base for easy mounting the projector on steel surfaces. With M10 hole for clamp 13. Slit for Velcro strap ELECTRICAL INSTALLATION Important: The electrical installation should be carried out by qualified personal only, according to the regulations for electrical and mechanical safety in your country. Note: In the explanations below we assume that you will operate the projectors with the internal battery which is already fully charged.
ENGLISH USER MANUAL SPECIFICATIONS This unit is radio-interference suppressed. This product meets the requirements of the current European and national guidelines. Conformity has been established and the relevant statements and documents have been deposited by the manufacturer. This device was designed to produce decorative effect lighting and is used in light show systems.
