User Manual

ENGLISH USER MANUAL
JB SYSTEMS
®
6/7 ROTOGOBO ZOOM
[CHAN03] Mode:
DMX Channel
DMX-value
function
1
000-255
Dimmer
2
000-005
No Rotation
006-186
Gobo indexation
187-189
No Rotation
190-219
Left Rotation (fast to slow)
220-222
No Rotation
223-253
Right Rotation (slow to fast)
254-255
No Rotation
3
000-005
GOBO Indexing disabled
006-249
GOBO Indexing enabled
250-255
GOBO Indexing disabled
[CHAN04] Mode:
DMX Channel
DMX-value
function
1
000-255
Dimmer
2
000-031
Led OFF
032-063
Led ON
064-095
Strobe (slow to fast)
096-127
Led ON
128-159
Pulse effect (slow to fast)
160-191
Led ON
192-223
Random Strobe (slow to fast)
224-255
Led ON
3
000-005
No Rotation
006-186
Gobo indexation
187-189
No Rotation
190-219
Left Rotation (fast to slow)
220-222
No Rotation
223-253
Right Rotation (slow to fast)
254-255
No Rotation
4
000-005
GOBO Indexing disabled
006-249
GOBO Indexing enabled
250-255
GOBO Indexing disabled
EXCHANGING A GOBO
The logo projector accepts metal gobos, glass gobos and self-printed gobos (laser printer *).
GOBO SIZE: Ø 25,7mm / IMAGE SIZE: Ø 19mm
• Turn the GOBO LOCK knob (13) over 90° counterclockwise.
• Gently pull the GOBO HOLDER (14) upward to remove it from the housing.
• Remove the fixation ring of the gobo. You can do this easily with a small screwdriver.
• Remove the gobo and insert the new gobo with the black side facing the back of the projector.
• Press the fixation-ring together and insert it in front of the gobo.
• Make sure that the end of the fixation ring locks in the groove of the gobo holder.
• Press the GOBO HOLDER (14) gently back in the housing
• Turn the GOBO LOCK knob (13) over 90° clockwise.
• Done!
Note: if you want to print the gobos yourself, please download the instructions from the product page on our
website. (
www.jb-systems.eu )