DMX Chart Version 1.05

- 31 -
P10
Via the control channel different functions of the xture can be switched. The following functions
can be switched via the control channel.
Response of the headlamp when dimming via faders
BACKLIGHT MODE - display backlight
DISPLAY ORIENTATION - display orientation
MAIN SCREEN MODE - main screen view
USER FIXTURE ID SET - set headlight number
DIMMER CURVE - dimmer curve adjustment
FROST CURVE - setting the frost curve
PAN / TILT SPEED - pan / tilt speed
EFFECT SPEED - effect speed
LED FADE OUT MODE - type of dimming
COOLING MODE - adjust the fan volume and brightness
CAMERA MODE - sets the LED refresh rate
RESET - a basic reset of the headlight is performed
For details, see DMX Channel Functions for the P10 Prole on page 24.
6.1.3 Control channel
To activate the autofocus function, set the autofocus distance channel to around 50%. Then best
use gobo wheel 2 for ne adjustment of the system and set the focus accordingly to 125 (32000):
Then set the distance to the headlight by focusing the headlight using the autofocus distance. As
a guideline, DMX value divided by 10 corresponds to the distance (DMX 100/10 distance = 10m).
Now the headlight can be operated with autofocus via the zoom. Using the following table, the
focus values for the individual effects can now be preselected and zoomed in with autofocus.
6.1.5 Auto focus
Animation effects can be created via this channel in connection with the focus. Depending
ontheintensity, the projection can be made to shake more or less. This effect can be dimmed
or switched.
6.1.4 Sparkle effect, sparkle speed
Gobo1 Gobo2 Open Shapers Iris
Focus 8Bit 95 125 185 195 215
Focus 16Bit 24320 32000 47360 49920 55040
6.2 Artnet
The spotlight can be controlled via Artnet - ArtNET 4. To do this, set the Artnet address via the
menu item DMX / NET ADDR -> ARTNET ADDRESS and also select it via the menu item PER-
SONALITY -> DMX INPUT CONFIG -> NETWORK -> MODE -> ARTNET. In addition, dene the
IP address of the spotlight via PERSONALITY -> DMX INPUT CONFIG -> NETWORK -> IP AD-
DRESS.
6.3 Streaming ACN
The headlight can be controlled via sACN - Streaming ACN. To do this, set the sACN address
via the menu item DMX / NET ADDR -> SACN ADDRESS and also select it via the menu item
PERSONALITY -> DMX INPUT CONFIG -> NETWORK -> MODE -> SACN. In addition, dene
the IP address of the spotlight via PERSONALITY -> DMX INPUT CONFIG -> NETWORK -> IP
ADDRESS.