User Guide

75
SignalScope
The SignalScope displays values of other objects and variables on your Lemur. The
“trace” shows a recent history of the value of what you are monitoring.
Variables
None
Dimensions
Default 100 x 100 pixels
Minimum 32 x 32 pixels
General Properties
 Label If checked, the object’s name is displayed in the scope area.
 Mode XY If checked, the signal scope shows both an X and Y value plotted
against each other. If unchecked, the X value is time, shifting Y
values to the left at a rate set by the Speed property (see below).
Samples The number of samples shown at one time in the display space.
The plot width will be thicker for smaller numbers of samples.
Behavior Properties
X = If Mode XY is enabled, X can be the value of a variable or a
constant, otherwise it is assigned to time against which the Y value
will be plotted.