User's Manual

10
11
1 Presson front panel to switch the source to Bluetooth Mode ,
2 LED light of Bluetooth sign turns on .
3 Press 1 second, light starts breathing , after 5 seconds sound tone indicated “du
du”, the system into pairing mode .
4 Turn on the Device Bluetooth connect. Select the Bluetooth domain name MUZIX L2.
5 There is no No password required. After the “Beep” sound tone, the system is successfully
connected.
A.Pairing from control panel
B. Pairing from remote control
1 Press on remote control to switch the source to Bluetooth Mode
2 LED light of Bluetooth sign turn on in soundbar .
3 Press button on remote control light starts breathing , after 5 seconds sound tone
indicated “du du”, the system go into pairing mode .
4 Turn on the Device Bluetooth connect. Select the Bluetooth domain name MUZIX L2.
5 There is no No password required. After the “Beep” sound tone, the system is successfully
connected.
.
Reconnecting
P r e c a ut i o n s
• Do not use an AC adaptor or AC power cord (mains lead) other than the supplied AC
adaptor and AC power cord (mains lead). Do not modify the cord.
• Do not touch the plug of the AC power cord (mains lead) with wet hands.
• Do not touch the AC power cord (mains lead), AC adaptor or the unit, if connected to an
electrical outlet, during an electrical storm.
• Do not place heavy items on the cord.
• Do not place the AC power cord (mains lead) near heating equipment and do not expose
the cord to heat.
• Completely disconnect the AC power cord (mains lead) from the wall socket (mains) if it
is not going to be used for an extended period of time. When unplugging the unit, always
grip the plug. Never pull the cord itself.
• Do not place the unit in an inclined position or in locations that are extremely hot, cold,
dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct
sunlight or a bright light.
• Be careful when placing the unit on surfaces that have been specially treated (for
example, with wax, oil, polish) as staining or discoloration of the surface may result.
• Since a strong magnet is used for the speakers, keep personal credit cards using
magnetic coding or spring-wound watches away from the unit to prevent possible
damage from the magnet.
On heat buildup
• Heat buildup on the unit during operation is normal and is not a cause for alarm.
• Do not touch the cabinet if it has been used continuously at a high volume because the
cabinet may have become hot.
• Do not obstruct the ventilation holes.
On cleaning
Clean this unit with a soft cloth slightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or
alcohol.
On safety
Should any solid object or liquid get into the unit, unplug the unit, and have it checked by
qualified personnel before operating it again
On power sources
• Before operating the unit, check that the operating voltage is identical with your local
power supply.
• Do not plug the AC power cord (mains lead) for the unit into an electrical outlet until
you have made all other connections. Make sure the TV or other equipment is
unplugged from the electrical outlet prior to connecting it to the unit.
• Do not connect the AC power cord (mains lead) to a voltage transformer or inverter.
Connecting the AC power cord (mains lead) to a voltage transformer for overseas
travel or an inverter for use in an automobile may cause heat to build up in the AC
adaptor and may cause burns or a malfunction.
S p e c i f i c a t i o n s
B l u e t o o t h Pa i r i n g P r oc e s s
1.New Device Reconnect:The original connected device must forget the Bluetooth
connection of MUZIX L2 first, and then follow the Bluetooth connection method A or B, step
1 to 5, for connecting a new device.
2.For Current Device:The connected device will automatically connect when system
power on or when switch back to Bluetooth from different input source. Only when the
connected device chooses “forget the soundbar domain name”, MUZIX L2 will be able to
reconnect new device.
Model Name JS6303WA
General
Power Supply
Bar
Subwoofer
Bar
Subwoofer
Dimensions
IR Remoter
Operation Indicator
Input Source
User Interface
Gradually Volume Control
Bar
Rated Output
Subwoofer
Power
24V/2.5A DC input
AC100-240V~ 50/60Hz
W815XH90XD81 mm
W240XH323XD240 mm
Yes
LEDindicator
Analog:3.5mm Phone Jack
Digital:Optical
Digital:Bluetooth
Button(5 keys)
Power ON/Source Change
20W/CH,8 ,THD=10%,1KHzΩ
65W/4 ,THD=10%,100HzΩ
Amplifier
Output Gain
Amplifier
Sound Effect
Class D
Movie/Music/Voice
- dB,-40dB~ +4dB