User's Manual
ENGLISHENGLISH
【Precautions】
Effective distance for the Bluetooth receiver is 10m maximum in an
unobstructed range; it may be reduced due to obstacles between
transmitter and receiver.
【Out of range or signal interruption】
When the device is out of the range of the Bluetooth receiver, or when
any obstacle gets in the way of transmission, the connection may be
interrupted. To avoid interruption, please follow these instructions:
1. Make sure that the effective range of 10m is not exceeded, and that
no obstacle gets between the portable device and the receiver.
2. In case the portable device is moved out of the range, moving it back
into the range will resume the Bluetooth connection again.
3. In case the separation from the range is too far and the connection cannot be
resumed automatically, please the Bluetooth function key for 2secs to
activate pairing function on the unit.then to have your smart phone to
re-cinnect with Z2 device.
How to connect the product
Touch-panel operation interface
Power Switch. Click this button to switch ON the machine. Press
again to power off.
Hands-Free. Pressing this button when the cell phone is showing
an incoming call will activate Hands-Free function, for the user to
make the call in Loudspeaker Mode. (Press again to terminate the
call.)
Click this button for 2 seconds to activate Bluetooth mode; when
ashing blue light, the machine is entering in pairing mode. The
user then activates the Z2 device of the cell phone for paring with
a Bluetooth device. the machine is connected successfully when
blue light turns steady and the system is ready for playing back
music.
Press this button to decrease volume while playing music or in
Hands-Free mode.
Press this button to mute the sound output while playing music
or in Hands-Free mode.
Press this button to increase volume while playing music or in
Hands-Free mode.
The NFC function enables your Android smartphone to fast pair
with another Bluetooth device.
1. Switch on the NFC function of your Android smart
phone (if available).
2. Move your smartphone above the "N" logo of your
product.
3. when a warning window pops out on your phone,select”
connect” or”conrm/ok” to complete the NFC connection.
4. You may also disconnect your device with Z2 via NFC function.
Please repeat step1 and step2 to disconnect the device.