User's Guide

ManualsBrandsJazwares ManualsDronesDrone (Cloudstrike Glider)

USER GUIDE

CNTS:

(2) REPLACMENT

ROTS

(1) GLIDER ONE

Please assemble the rotor guards

securely before flying

(1) REMOT CNTROL

(1) 4” FIGURE

(1) STAND / BASE

(1) SCREWDIVER

(1) 6” MICRO USB CAL

CLOUDSTRIKE GLIDER ONE

Warning: Always operate the glider drone at a distance from face

and body. Use the toy with skill and caution to control the ight and

avoid collisions with the user, objects, or third parties. Do not touch

the rotating rotor. Operate the toy at a maximum distance and avoid

nearing the rotor with loose clothing or hair that could get caught in

the rotor. Observe the conditions where you are using the toy; e.g.,

ying space, indoors or outdoors, no obstacles, and persons within

ying range to keep the toy in line of sight. Attention adult

supervisors: please teach children to y and control the drone safely.

FNT0121

Used with permission. Manufactured and Distributed by:

Jazwares, LLC, Sunrise, FL 33326, USA

Jazwares, 16A Crane Grove, London, N7 8LE, United Kingdom

Jazwares GmbH, Mina-Rees-Str. 8, 64295 Darmstadt, Germany

www.jazwares.com / www.jazwares.de

Epic Games, Inc. in the USA (Reg. U.S. Pat. & Tm. O.) and elsewhere.

The toy is only to be connected to class II equipment bearing the following symbol.

Protect the environment by not disposing of this product with household waste (2012/19/EU).

Check your local authority for recycling advice and facilities.

The products can be sold in all EU countries.

Frequency band range:2424-2453 MHz

Maximum radio-frequency power:0.155mW

Summary of content (11 pages)

PAGE 1
8+ CLOUDSTRIKE GLIDER DRONE USER GUIDE CONTENTS: (1) GLIDER DRONE Warning: Always operate the glider drone at a distance from face and body. Use the toy with skill and caution to control the flight and avoid collisions with the user, objects, or third parties. Do not touch the rotating rotor. Operate the toy at a maximum distance and avoid nearing the rotor with loose clothing or hair that could get caught in the rotor. Observe the conditions where you are using the toy; e.g.
PAGE 2
WARNINGS & PRECAUTIONS Important Safety Instructions: - Read and follow all instructions. - Keep these instructions for future reference. - Heed all Warnings. - Intended for children age 8 and higher. Adult supervision is required. - Only use attachments/accessories specified by the manufacturer. - Before flying, always check the body, rotors, and battery for any damage or obstructions. - Battery should be free from cracks or swelling.
PAGE 3
TABLE OF CONTENTS FNT0121 Drone Pages Pages - Features .........................................3 - Includes ..........................................3 - Diagram & Specifications ...............3 Flying - Remote Link & Calibration ............................6 - Flight Controls ...............................................7 - When You’re Finished Flying ........................7 - Trim Adjustment & Countering Drift ..............8 - Gyroscope Recalibration ...............................
PAGE 4
REMOTE CONTROL FUNCTIONS Left Control Stick: Throttle Fly Up / Down Rotate Left / Right Pairing Status Right Control Stick: Direction Fly Forward / Backward Fly Left / Right Trimming Emergency Stop Take Off / Landing On/Off Battery Installation 1. Batteries are to be replaced by an adult. 2. Non-rechargeable batteries are not to be recharged. 3. Rechargeable batteries are to be removed from the toy before being charged. 4. Rechargeable batteries are only to be charged under adult supervision. 5.
PAGE 5
CHARGING THE BATTERY INFORMATION & PROCEDURE The drone’s battery must be charged before it can be flown. To avoid risk of injury or damage, be sure the craft and remote control are both powered OFF. Charging time is approximately 150 minutes. Charge fully before use for best performance. Connect the 6” Micro USB cable (included) to the USB port of a powered ON computer or USB power adapter (not included), connect the USB charging plug to the battery plug.
PAGE 6
FLYING REMOTE LINK & CALIBRATION Before flying, the drone and the remote must be linked together and the gyroscopes on the drone must be allowed to calibrate. Step 1 Take out the Stand Base and assemble them, forming a displaying stand. Step 2 Take out the figure and affix it at the bottom of the drone. Step 3 After the figure is installed, place the drone and the figure on the displaying stand.
PAGE 7
FLIGHT CONTROLS Up Forward Turn Right Turn Left Lean Left Lean Right Backwards Down Left Control Stick controls Up / Down, Turn Left / Right. Right Control Stick controls Forward / Backwards, Lean Left / Lean Right When You’re Finished Flying After landing, Power OFF the remote BEFORE powering OFF the drone. This will ensure that no signals are accidentally sent by the remote, reducing the chance of injury. After this is done, it is safe to pick up and power OFF the drone.
PAGE 8
FLYING TRIM ADJUSTMENT & COUNTERING DRIFT Even after a drone is calibrated, it may still drift while airborne. To counter this effect, you can adjust the trim for better control. However, adjusting the trim may not entirely eliminate drifting. Air currents and other factors can still affect the drone’s handling. Making Trim Adjustments: Press the Trim button to enter Trimming Mode, indicated by a blinking indicator light on the remote.
PAGE 9
GYROSCOPE RECALIBRATION If the drone is having difficulty flying or is behaving erratically, it’s gyroscopes may need to be recalibrated. Do not attempt to do this while flying, safely land the drone first and place it on a flat surface. Note: The drone and the remote should already be linked together. Pull down and inwards on both control sticks for 2-3 seconds. When the LED lights have stopped blinking and turn solid, the recalibration is complete, and the drone is ready to fly.
PAGE 10
PARTS AND REPAIR REMINDER: Pilots are responsible for any damage caused by improper use. ROTOR REPLACEMENT The drone comes with replacement rotors if the originals are broken or badly damaged, use the included screwdriver to remove the rotor retaining screw that holds the rotor to the motor shaft. Once the retaining screw is out, pull upwards on the rotor to remove it from the motor shaft. Installation of the new rotor is the reverse of the removal process.
PAGE 11
Important: Rotor A Front of Drone Rotor B Follow this diagram to know the correct placement of the rotors A or B. Incorrect placement of the rotors will cause the craft not to operate properly. Rotor B Back of Drone Rotor A TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSES SOLUTION Drone does not respond to controls. - No power to remote or drone. - Poor contact between power plugs. - Drone is out of range. - Check remote batteries, replace if needed.