Use and Care Manual

www.longer3d.com [e-mail]
6
important to understand the RAY5 is not a toy and should be
operated with care and respect.
(10) Important information regarding your RAY5
RAY5 20W use 24V DC power system:
• Never Use a different voltage Power Adapter. The RAY5
requires DC 24V 5A.
• When using an alternative Power Adapter, the Voltage
should always be 24V, the minimum Amperage output
should be 5A. Higher amperage output Power Adapter
can be used without risk of damage to your RAY5.
• On inserting the power barrel into your motherboard, it
is possible that a small spark is visible. This is NOT
hazardous to your machine and is caused by the 24V
power inrush. If you prefer to avoid this, connect the
power barrel to your motherboard first, then connect
your power adapter to the mains electricity plug.
• Once the RAY5 detects 24V present you will see the
motherboard emit a light red glow on the LED of the
Motherboard. This mean the motherboard is powered.
• If when plugging your Power Adapter barrel to your