Use and Care Manual

www.longer3d.com [e-mail]
3
you can pay attention to the LONGER products (cover) in the
follow-up.
(4) The high-energy diode laser beam can produce extremely high
temperatures and significant amounts of heat as the substrate
material is burned away while engraving and cutting. Some
materials are prone to catch fire during cutting operations
creating flame, fumes, and smoke.
(5) Although the RAY5 has a built-in flame sensor, this technology
should NOT be considered 100% accurate and should be seen
only as a warning system.
During the working process of RAY5, if a flame is found, the
machine will stop the laser and make a sound to indicate
abnormal conditions. Please pay attention to the working status
of the machine.
during operation to ensure that any flare ups/ flame is properly
contained and extinguished.
It is strongly recommended that a Fire Extinguisher should be
located within proximity to the RAY5. Extinguishers should be
halogen or multi-purpose dry chemical. Alternatively, or in
conjunction with the Fire Extinguisher it is recommended a “Fire
Extinguisher Ball” is positioned beside the RAY5.