Use and Care Manual

www.longer3d.com [e-mail]
17
(2) Power On
a) Find the adapter and power cable and connect them. Please
make sure the output of RAY5 20W adapter is DC 24V 5A.
b) Connect the power cord to the power supply and connect
the other end of the adapter to the power port of the
motherboard.
c) Connect the computer and the engraving machine through a
USB computer (or insert a Micro SD card).
d) Turn ON your RAY5 20W by press the power switch (To Turn
OFF your RAY5 20W by press the power switch once again.)
(3) Touch Screen Operation
RAY5 20W has a full-color 3.5-inch touch screen with a user-friendly
user interface. Engraving and cutting work can be operated with
touch screen and SD card.
a) Home page
X Y Z current position
Laser Power
Wi-fi status