Use and Care Manual

www.longer3d.com [e-mail]
11
(4) Machine assembly
The machine step-by-step assembly process is described in the
document “RAY5 20W Quick Start Guide”. Please follow the guide
to assemble machine.
• During the machine assembly, if there is any unclear place,
please refer to the video “RAY5 20W Quick Start Guide”.
• Each unit of the engraving machine has been inspected and
tested. Therefore, in some cases, very small traces may be
left on the profile and the metal shell. These will not affect
the quality. It is normal that it does not affect normal
engraving. Thank you very much for your understanding.
• Be cautious during assembly as some parts may have sharp
edges.
• If you have any questions after receiving the product, please
contact our customer service first.