Instructions / Assembly

08
09
Synchronizing Two Foundations
If simultaneous operation of two foundations is desired, use the sync cord to connect the electronics of both
foundations together.
(single bed only)
Sync Cord
Wireless Remote
Head
Motor
Foot
Motor
Power USB
LED
APP
Sync
Head
Motor
Foot
Motor
Power USB
LED
APP
Sync
Attention: ( 1) If you want to toggle from "A" or "B" to "P" position to realize sync control, please press and hold "Flat"
again until to a flat position.
( 2) The quadded cable is in master control when synchronizing and the bluetooth
must be pluged in the master control box. (3) The interval must more than 4s between plug in and plug
out the sync cord.
STEP 1：Unplug foundations from the power source.
STEP 2：Connect the male ends of the sync cord to the female sync plugs of the control boxes (Refer to
illustration above).
STEP 3：
Plug foundations back into the power source.
STEP 4：Press and hold and button, a beep sound of the buzzer will be heard and the backlit light
of the wireless remote flashes twice. Open the battery box and toggle the switch to “P” position first,
next press and hold “FLAT” until you hear a beep sound of each buzzer on the control box, which
means the two foundations can be synchronized with one remote.
STEP 5：Open the battery box and toggle the switch to "A" or "B" position, you can control the two foundations
separately without removing the sync cord.
Leg Configuration Table（Optional）
Support legs may be needed on some slat/platform foundation, refer to the leg configuration table for height
adjustment.
Add Additional Leg Supports For Slat/Platform Foundation.
3” 6” 9” 3 " 6 "
9 "
Remote Pairing
1. Unplug the foundation from the power source then power it on, defaulting to remote pairing within 30s.
2. Next press and hold at the same time.
3. You will hear a beep sound of the buzzer and the backlit light of the wireless remote flashes two times, which
means the pairing is successful.
The original remote that comes in the box is already paired to the foundation. No further action is required.In
the event that the remote is not paired with the foundation, follow the steps below.
Head
Motor
Foot
Motor
Power USB LED
APP Sync
Electronics Quick Reference Guide
Wireless Remote
Power Supply
USB Charger
Bluetooth
Foot Motor
Head Motor
Under-Bed Lighting
Head
Motor
Foot
Motor
Power USB
LED
APP
Sync
Y-cable
DC Power Cord
Quadded CableTriplex Cable