Assembly Instructions M-SCT1501C M-SCT1501R
1 9 10 6 11 12 7 4 10 8 14 5 15 14 3 13 16 2 19 18 16 17 20 18 19 １
Wooden dowel Ø8x30mm Cam bolt Ø6x35mm Cam lock Ø15x11mm Sticker Plate A x 24 B x 17 C x 17 D x 17 E x4 F x 12 Shelf support pin Ø8x5x16mm Bolt Ø6x13mm Glue tube Screw Ø4x50mm Plastic wedge Flat-head screw Ø3x17mm G x 12 H x8 I x1 J x8 Hexagon socket key M4 Bolt Ø6x13mm Bolt Pulley M x1 N x 24 O x1 P x4 Plastic strap S x2 Nut T x2 Philips head screwdriver required for assembly (not included) ● The provided glue(part I) is to secure wood dowels(A) in place .
B 7 8 B x6 · Screw parts (B) into panels (7,8).
1 2 6 3 · Insert dowels(A) into panels(3,6). · Attach panel (8) to panel (6). Attach panel (7) to panel (3). · Insert and secure cam lock (C) to panels (3,6) to lock it.
1 3 2 · Insert dowels(A) into panels(3,６). · Attach panel (９) to panels (3,６). · Insert and secure cam lock (C) to panel (９) to lock it.
A 5 6 4 3 2 · Insert dowels(A) into panels(3,4,5,6). · Attach panels (3,4,5,6) to panel (2) using screws(J).
18 19 1７ 19 18 20 Ｏ N · Attach parts (19) to parts (17,18) using Bolts(N). M x 1 N x 12 Ｏ x 1 · Attach part(O) into part(17), then attach leg(20) to part(O).
18 2 19 18 19 N · Attach parts(18,19) to panel(2) using Bolts(N).
P H 16 H x8 · Attach parts(P) to panels(16) using bolts(H).
9 16 16 · Slide panels(16) into designated area.
16 · Attach parts(E) to back of panels(16) using screws(F) as shown.
·Carefully slide panels (10,11,12,13) into place along the back of the assembly.
B 1 B x 11 · Screw parts (B) into panel (1).
1 3 2 · Insert dowels(A) into panels(3,4,5,6,9). · Attach panel (1) to panels (3,4,5,6,9). · Insert and secure cam lock (C) to panels (3,4,5,6,9) to lock it.
11 10 12 13 10 L K K x 14 · Secure parts(K) using Screws(L).
5 6 14 Finished edge G · Attach panel(14) to panels(5,6) using parts(G).
3 4 14 Finished edge G G x4 · Attach panel(14) to panels(3,4) using parts(G).
5 15 Finished edge G · Attach panel(15) to panels(4,5) using parts(G).
1 WARNING 2 3 Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors.
1 2 · Stick stickers(D) on cam lock(C). · Adjust leg(20) to level the unit.
