Instructions / Assembly

Table Of Contents

HULALA

H O M E

ITEM NO.SFM0140

PAGE 1
HULALA H O M E ITEM NO.
PAGE 2
Ax1 Cx4 LB 500LBS Bx1
PAGE 3
HARDWARE ASSEMBLY LIST INSTRUCTIONS C Dx8 M8x55mm Ex12 M6x20mm Fx8 Gx8 Hx1 M8 Ix1 M6 Dx1 M8x55mm Ex1 M6x20mm Fx1 Gx1 Hx1 SPARE Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during shipment. B STEP 1 Open the zip on bottom of the seat cushion B under pocket and take out the components. Place the seat cushion B on a clean padded surface.
PAGE 4
A F G D B H STEP 2 Align hole position on seat cushion B and back A , use bolt D, flat wahser F, spring wahser G allen wrench H to connect seat and back, Don’t fasten any bolt until all botls connected properly and position aligned correctly. I E C H Adjust levelers under legs to set the loveseat level. STEP 3 Use bolt E, allen key I to attach legs bottom of the seat cushion and fasten all bolts. STEP 4 Assembly completed.