Instructions / Assembly

Assembly Instructions
Item NO: SFLB0198
No.
Parts
Quantity
1-BACK
1
2-ARMS
2
3-SEAT
1
4-LEGS
8
2. Attach the black plastic legs (4) to the bottom
corners of the seat cushion (3) as shown. Attach
the wood legs (4) to the bottom corners of the arms.
1.Remove all parts from the carton A&B and place
them on a protected surface or carpet. Take out
the legs 4 (plastic legs-4pcs, wood legs-4pcs) out
of the A box.
4. Make sure the male and female brackets align then
attach the left side facing arm (2) to left side of the
seat cushion (3) as shown.
3. Make sure the male and female brackets align then
attach the right side facing arm (2) to right side of
the seat cushion (3) as shown.
5. Make sure the male and female brackets align then
attach the back cushion (1) to rear side the seat
cushion (3) as shown.