Installation Guide

Table Of Contents

HULALA

H O M E

ITEM NO.SFM0327

PAGE 1
HULALA H O M E ITEM NO.
PAGE 2
Ax1 Cx4 LB 400LBS Bx1
PAGE 3
HARDWARE ASSEMBLY LIST INSTRUCTIONS C Dx8 M8x55mm Ex16 M6x20mm Fx8 Gx8 Hx1 M8 Ix1 M6 Ex1 M6x20mm Fx1 SPARE Dx1 M8x55mm B Gx1 Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during shipment. STEP 1 Open the zip on bottom of the seat cushion B under pocket and take out the components. Place the seat cushion B on a clean padded surface.
PAGE 4
A F G D B H STEP 2 Align hole position on seat cushion B and back A , use bolt D, flat wahser F, spring wahser G allen wrench H to connect seat and back, Don’t fasten any bolt until all botls connected properly and position aligned correctly. I E C Adjust levelers under legs to set the loveseat level. STEP 3 Use bolt E, allen key I to attach legs bottom of the seat cushion and fasten all bolts. STEP 4 Assembly completed.