ITEM NO: SCSY0752 NOTE: This brochure contains IMPORTANT safty info.
CHRISTOBAL 54'' WIDE 6 DRAWER DRESSER A X4 Leg B X1 Base Panel C X1 Left Side Panel D X1 Right Side Panel E X2 Beams F X1 Center Panel G X1 Top Panel Page 1 /8 H X1 Back Panel 1 I X1 Back Panel 2 J X6 Drawer Left Side Panel K X6 Drawer Right Side Panel L X6 Drawer Back Panel M X6 Drawer Bottom Panel N X6 Drawer Front Panel TOOLS EXCLUDED: Phillips Screwdriver O X6 Drawer Support P X1 Leg Support 1 X1 Allen Key 2 X4 Allen Bolt 1/4" * 1-1/2" 3 X24 Dowel Ø6 * 30mm 4 X4 Dowel Ø8 * 30mm 5 X
* Please remove the tape before assembling. Step 1. Attach the legs (A) to the side panel (C,D) by rotate legs clockwise Step 2A.Attach the the base (B) to the left side panel (C) using allen bolt (2), flat washers (8), spring washers (9), dowel (4) and allen key (1) Step 2B.Attach the beams (E) to the left side panel (C) by placing the plastic pieces in the slots and sliding the beams (E) forward. Step 2C.
Step 3A.Attach the right side panel (D) to the beams (E) by placing the plastic pieces in the slots and sliding the right side panel (D) backwards. Step 4.A.Attach the center panel (F) to the base panel (B) by placing the plastic pieces in the slots and sliding the center panel (F) forward. Step 3B.Attach the right side panel (D) to the base (B) using allen bolt (2), flat washers (8), spring washers (9), dowel (4) and allen key (1) Step 4.B.
Step 5. Attach the top panel (G) to side panel (C,D) and center panel (F) by placing the plastic pieces in the slots and sliding the top panel (G) backwards. Step 6.
Step 7 . Attach the drawer right side panel (J) and drawer left side panel (K) to the drawer back panel (L) using the dowel (3) , screw (5) and Phillips screwdriver. Then slide the drawer bottom panel (M) into the grooves of the side panels. Step 9.Attach the drawer front panel (N) to the drawer sides (K,J) using the screw (5) and Phillips screwdriver Step 8 . Attach the drawer support (O) to the drawer back panel (L) using the screw (5) and Phillips screwdriver.
Step 10.Attach the drawer support (T) to the drawer front panel 2 (R) using the screw (5) and Phillips screwdriver. Step 11. Attach the handle (10) to the drawer front panel (N) using the bolt (7) and Phillips screwdriver Repeat steps 7-11 for the six large drawers.
Step 12. Place the drawers into the dresser frame on the metal tracks and slowly work the drawers into place until fully closed. To remove the drawers, use the lever release. Pull the drawer out as far as possible, and you'll see a plastic lever on each side.
Step 13. Attach a bracket securely to the back top rail of the dresser using the 5/8” screw provided, through the smaller hole. Locate the other bracket on the wall over a wall stud and 2 inches below the mounting bracket secured to the back of your unit. Attach the wall stud using the 2” screw provided, through the smaller hole. Place the dresser into posifion so both mounting brackets are vertically inline. Lace the end of the restraint strap through the larger hole in each mounting bracket.
WARRANTY We' re committed to designing beautiful modern furniture that complements a variety of décor styles and tastes using the highest quality materials and fabrics. Our Manufacturer' s warranty covers defects in materials and workmanship for 30days from the products date of delivery. Please email us your order No and contact information to located your order if you need any help. Enjoying your HULALA furniture.
