HULALA H O M E ITEM NO.SCCL0909 NOTE: This brochure contains IMPORTANT safty info. Please read and keep for future reference.
MAINTAINANCE AND WARNING 1.Keep furniture away from heat sources. 2.Do not clean furniture with harsh cleaner or polishes.Do not use detergents,solvents,abrasives,spray packs or leather cleaner. Use non-color mild soa with warm water to clean spills(Mix 1:10 soap to water). 3.Do not place furniture under direct sunlight,material will possibly fade over time. 4.Do not use on site dry cleaning machine.Children should not climb or jump on the furniture. 5.
EXPLOSIVE VIEW A C B C B 2PERSONEN 03/15
PARTS LIST A x1 B x2 C x2 04/15
HARDWARE LIST #1 x4 Ø6*35mm #7 x2 #2 x4 #3 x4 x1 x8 M4*40mm Ø15*11mm #8 #4 #9 #5 x2 M3.5*15mm #6 x2 M4*35mm x2 TOOL LIST #10 x1 HARDWARE SPARE LIST #1 x1 Ø6*35mm #4 x1 M4*40mm #5 x1 M3.
ASSEMBLY INSTRUCTIONS STEP-1 Insert screw bolt #1 into the corresponding hole of leg (C), tighten bolt #1 with screwdriver #10.
ASSEMBLY INSTRUCTIONS STEP-2 Insert leg (C) into the panel (B),and then insert cam bolt #2 into the panel (B)tighten cam bolt #2 with screwdriver #10.
ASSEMBLY INSTRUCTIONS STEP-3 Insert preassemble step 2 into panel (A) and make sure all the holes are aligned.
ASSEMBLY INSTRUCTIONS STEP-4 In preassemble step 3，make sure all holes aligned and then use bolt #4 to attach them，tighten bolt #4 with screwdriver #10.
ASSEMBLY INSTRUCTIONS STEP-5 As shown in the figure,remove the #3 back protective layer and attach the felt mat #3 to the leg (C).
ASSEMBLY INSTRUCTIONS STEP-6 Remove the screw using #10 screwdriver, place the handle in front of panel, connect the handle with a screw and lock the screw with a screwdriver#10.
ASSEMBLY INSTRUCTIONS #5 x2 #9 x1 #10 x1 M3.5*15mm STEP-7 Use screw #5 to plastic bracket #9 to panel (A),tighten screw #5 with screwdriver #10.
ASSEMBLY INSTRUCTIONS #6 x2 #7 x2 #9 x1 #10 x1 M4*35mm STEP-8: 1. Mark the position on the wall, that corresponds to the location of bracket on the top panel (A); Drill and insert the expandable screw by hammer. 2. Assemble the bracket to the wall. Align the hole in the bracket with the expandable screw , use screw to attach it,tighten screw with screwdriver . 1. AL L W L L WA 2.
ASSEMBLY INSTRUCTIONS #8 x1 STEP-9: 3.Let the plastic belt #8 pass through bracket #9 and pull tightly.
WARRANTY 1.We strive to offer high-quality products,and we also try our best to satisfy each and every customer that orders from us with product or service as needed. 2.We provide 30 days warranty starting from the time you receive the item.Each customer must provide a record of their order such as the order number,or item receipt for any items that are out of the warranty period you may also still receive. 3.Replacement parts by purchasing them with our company if they are available.
