HULALA H O M E ITEM NO.SCBSD0590 NOTE: This brochure contains IMPORTANT safty info. Please read and keep for future reference.
MAINTAINANCE AND WARNING 1.Keep furniture away from heat sources. 2.Do not clean furniture with harsh cleaner or polishes.Do not use detergents,solvents,abrasives,spray packs or leather cleaner. Use non-color mild soa with warm water to clean spills(Mix 1:10 soap to water). 3.Do not place furniture under direct sunlight,material will possibly fade over time. 4.Do not use on site dry cleaning machine.Children should not climb or jump on the furniture. 5.
EXPLOSIVE VIEW A G D F G E I F H C B J K J 2PERSON OVERVIEW 03/23
PARTS LIST A x1 B x1 C x1 D x1 E x1 F x2 G x2 H x1 I x1 J x2 K x1 04/23
HARDWARE LIST #1 x6 ∅6x35mm #2 x6 M7x50mm #3 x2 M6x40mm #4 x7 M6x50mm #5 x40 #6 x4 M3.5x14mm M4x35mm #5 #6 HARDWARE SPARE LIST #1 x1 ∅6x35mm #2 x1 M7x50mm #3 x1 M6x40mm #4 x1 M6x50mm x4 M3.
HARDWARE LIST #7 x12 ∅8x30mm #13 x4 #8 x6 ∅15x11mm #14 x4 #9 x6 #10 x8 #16 x8 #11 x4 #12 x2 ∅20mm #15 x2 ∅8x30mm TOOL LIST #17 x1 #18 x1 M4 06/23
ASSEMBLY INSTRUCTIONS STEP-1: Insert wooden dowel #7 into the corresponding hole of top panel (A),screw bolt #1 into the corresponding hole of top panel (A),tighten bolt #1 with screwdriver #18.
ASSEMBLY INSTRUCTIONS STEP-2: Insert panel (D)&(E)&(C) into top panel (A) as picture show,and then insert cam bolt #8 into the corresponding hole of panel (D)&(E)&(C),tighten cam bolt #8 with screwdriver #18，finally，stick paster #9 on the corresponding hole of panel (D)&(E)&(C).
ASSEMBLY INSTRUCTIONS STEP-3: Carefully align and slide panel (G) into the groove along rear edge of pre-assemble unit at step 2,slide the panel (G) into the bottom,and the insert wooden dowel #7 into the corresponding hole of panel (D)&(E)&(C).
ASSEMBLY INSTRUCTIONS STEP-4: Use bolt #2 to attach bottom panel (B) to the corresponding hole of panel (D)&(E)&(C),tighten bolt #2 with allen key #17.
ASSEMBLY INSTRUCTIONS STEP-5: Use bolt #3 to attach leg (J) to rail (K),tighten bolt #3 with allen key #17.
ASSEMBLY INSTRUCTIONS STEP-6: Use bolt #4 to attach preassemble leg (J)&(K) to the corresponding hole of bottom panel (B),tighten bolt #4 with allen key #17.
ASSEMBLY INSTRUCTIONS STEP-7: Attention: Before the next step, adjust the feet of the locker to keep it level. Attention: Before the next step, adjust the feet of the locker to keep it level.
ASSEMBLY INSTRUCTIONS STEP-8: Use screw #5 to attach part #16 to bottom panel (A)&(B)&(C)&(D)&(E),tighten screw #5 with screwdriver #18. A C E D G G B #16 #5x8 #18 #16x8 #5 x8 #16 x8 #18 x1 M3.
ASSEMBLY INSTRUCTIONS STEP-9: Insert shelf holder #10 into the corresponding hole of panel(C)&(D)&(E) and then attach adjustable shelf (F) to it.
ASSEMBLY INSTRUCTIONS STEP-10: Use screw #5 to attach hinge #11 to door (I)&(H),tighten screw #5 with screwdriver #18. #5 #11 #5 #11 I #5 #11 H #5 #11 #18 #5x8 H&I #11x4 #11 x4 #5 x8 #18 x1 M3.
ASSEMBLY INSTRUCTIONS STEP-11: Use screw #5 to attach preassemble hinge #11 to panel (C)&(D), tighten screw #5 with screwdriver #18. #5x16 #11 A H&I #18 C&D A C&D A H&I D C I H #5 x16 #18 x1 M3.
ASSEMBLY INSTRUCTIONS Concealed hinges are three-way adjustable: o Do r Sid ep an els or Do Sid ep an els Horizontal by screw adjustment! Concealed hinges are three-way adjustable: or Do Sid ep an els or Do Sid ep an els In-and-out by loosening the hinge arm mounting screw or via cam adjustment! Concealed hinges are three-way adjustable: or Do Sid ep an els or Do Sid ep Vertical via slots in the mounting plate or via cam adjustment! an els Hinge adjustment method 18/23
ASSEMBLY INSTRUCTIONS STEP-12: Insert part #12 into the corresponding position of door (I)&(H),and then use screw #5 to attach part #12 to door (H)&(I),make sure all holes aligned and tighten screw #5 with screwdriver #18. #12x2 #5x4 #18 #12 H &I I H #12 x2 #5 x4 #18 x1 M3.
ASSEMBLY INSTRUCTIONS #13 #5 x2 x4 #18 x1 M3.5x14mm STEP-13: Use screw #5 to attach plastic bracket #13 to panel (C)&(D),tighten screw #5 with screwdriver #18.
ASSEMBLY INSTRUCTIONS #13 x2 #6 x4 #18 x1 M4x35mm #14 x4 ∅8x30mm STEP-14: 1. Mark the position on the wall, that corresponds to the location of bracket on the side panel (C)&(D); Drill and insert the expandable screw by hammer. 2. Assemble the bracket to the wall. Align the hole in the bracket with the expandable screw , use screw to attach it,tighten screw with screwdriver . NOT PROVIDED 1. ll Wa L W AL #13 #6 #13 2.
ASSEMBLY INSTRUCTIONS #15 x2 STEP-15 3. Let the plastic belt pass through bracket and pull tightly. 2. #13 #15x2 #13 ll Wa 1.
WARRANTY 1.We strive to offer high-quality products,and we also try our best to satisfy each and every customer that orders from us with product or service as needed. 2.We provide 30 days warranty starting from the time you receive the item.Each customer must provide a record of their order such as the order number,or item receipt for any items that are out of the warranty period you may also still receive. 3.Replacement parts by purchasing them with our company if they are available.
