Instructions / Assembly

8/1 5
Install part 2
1) Align the hole in part 3,4,5, insert the part D by hand;
2) Align the hole in part 2, insert the part D into the part 2 at the
same time, then
3) Align the the hole in part 2 to the hole in part 3,4,5,6, screw in
the screw C and fully tighten by Allenkey K.
Install part 8
1) Align the groove in part 4, 6 and 1, insert part 8 into the groove and
slide down to the end. be sure the part 8 in the groove of part 1.
2) Repeat the same way to finsih the rest of part 8.
1
6