Instructions / Assembly

Table Of Contents

13/1 5

Prepare the doors(part 13 and 14)

1)Align the hole in part I to the pre-drilled hole in part 13, screw in the screw

E and fully tighten by screwdriver T;

2) Align the hole in part N to the pre-drilled hole in part 13, screw in the

screw E and fully tighten by screwdriver T;

3) Repeat the same way to finish part 14 with part I and N.

4) Align the hole in part I to the predrilled hole in part 5, screw in the screw E

and fully tighten by screwdriver T

5) You can adjust the door to fit the cabinet as the picture show.