Instructions / Assembly
12/1 5
Prepare the part H and part N
1)Align the hole in part H to the pre-drilled hole in part 12, screw in the
screw E and fully tighten by screwdriver T;
2) Align the hole in part N to the pre-drilled hole in part 12, screw in
the screw E and fully tighten by screwdriver T;
3) Repeat the same way to finish part 15 with part H and N.
4) Align the hole in part H to the predrilled hole in part 3 and 4, screw
in the screw E and fully tighten by screwdriver T
5) you can adjust the door to fit the cabinet as the picture show.