Instructions / Assembly

Table Of Contents

12/1 5

Prepare the part H and part N

1)Align the hole in part H to the pre-drilled hole in part 14,

screw in the screw E and fully tighten by screwdriver S;

2) Align the hole in part N to the pre-drilled hole in part 14,

screw in the screw E and fully tighten by screwdriver S;

3) Repeat the same way to finish part 17 with part H and N.

4) Align the hole in part H to the predrilled hole in part 3 and

4, screw in the screw E and fully tighten by screwdriver S

5) You can adjust the door to fit the cabinet as the picture

show.