NONPERSON ITEM NO.SBTY0604 NOTE: This brochure contains IMPORTANT safety info. Please read and keep for future reference.
MAINTENANCE AND WARNING Keep furniture away from heat. Do not clean furniture with harsh cleansers or polish. Do not use detergents, Solvents, abrasives, spray packs or leather cleaner. Use non-color mild soap with warm water clean spills(Mix 1:10 soap to water) Do not place furniture under direct sunlight, material will possibly fade over time. Do not use on site dry Cleaning machine. Children should not climb or jump on the Do not write on furniture without a padded barrier to protect the surface.
ASSEMBLY INSTRUCTIONS Please do not use tools to assemble this unit unless specifically indicated. Reference the images above any time the instructions state "lock the hardware". Note:Be sure to check all hardware is locked when completed. STEP 1 Prepare the part 2,16 ,17. Align the hole in part 16 ,17 to the hole in part 2 tighten it by hand.
ASSEMBLY INSTRUCTIONS STEP 2 Prepare the part 2,5. Attach bottom panel 2 to assembled unit 5 using wooden dowels A, bolts F, spring washers G, flat washers H and Allen wrench |.
ASSEMBLY INSTRUCTIONS STEP 3 Prepare the parts 6. Attach magnets J to rail panel 6 using round head screws K and fillips head screwdriver. Attach rail panel 6 to assembled unit 5.
ASSEMBLY INSTRUCTIONS STEP 4 Prepare the parts 4. Attach panel 4 to assembled unit 2, 6 using wooden dowels A and lock the hardware, and bolts F, spring washers G, flat washers H and Allen wrench |.
ASSEMBLY INSTRUCTIONS STEP 5 Prepare the parts 3. Attach panel 3 to assembled unit 2, 6 using wooden dowels A and lock the hardware, and bolts F, spring washers G, flat washers H and Allen wrench |.
ASSEMBLY INSTRUCTIONS STEP 6 Prepare the parts 1. Attach top panel 1 to assembled unit 3, 4, 5 using wooden dowels A and lock the hardware.
ASSEMBLY INSTRUCTIONS STEP 7 Prepare the parts 15. Open the back panel 15 at 180 degrees. Attach back panel 15 to assembled unit using screws C and fillips head screwdriver.
ASSEMBLY INSTRUCTIONS STEP 8 Prepare the parts Attach panels 11, 12 to back panel 13 using screws N and fillips head screwdriver.Slide drawer bottom panel 14 into the grooves of assembled unit 11, 12, 13. Use the screwdriver T and screws N to attach parts 11, 12 to drawer front panel 10, make sure all holes aligned and tighten all screws to secure.
ASSEMBLY INSTRUCTIONS STEP 9 Assemble drawer to the cabinet 1) Find the moving part in male metal slider in drawer }, be sure the moving part is in the back of metal slider as the picture show; 2) Find the moving part in female metal slider in the cabinet be sure the moving part is in the front of metal slider as the picture show. 3) Align the male metal slider to the moving part in female metal slider, then push forward while two male sliders are in the moving part in female at the same time.
ASSEMBLY INSTRUCTIONS STEP 10 Prepare the parts 7. Place shelf holders B into desired position and slide adjustable shelves 7 into place. STEP 11 Prepare the part 8 ,9. Use the screwdriver T and screws E to attach part D to part 8. 9, make sure all holes aligned and tighten all screws to secure. Use the screwdriver T and screws M to attach the handle L to part 8. 9, make sure all holes aligned and tighten all screws M to secure.
ASSEMBLY INSTRUCTIONS STEP 12 Prepare the parts 9. head screwdriver.
ASSEMBLY INSTRUCTIONS STEP 13 Prepare the parts 8. Attach left door panels 8 to panels 3, 5 using screws E and fillips head screwdriver.
ASSEMBLY INSTRUCTIONS STEP 14 Install the anti-collapse device. 1.Mark the position on the wall, this should be same as the position of P where are on the back of panel 1; Drilled and insert the expandable screw O by hammer; 2.Assemble the part P on the wall. Align the hole in the part P to the expandable screw O, Screw in screw R and tighten it with screwdriver T. 3.Use the screwdriver T and screws Q to attach the part P to panel 1, make sure all holes aligned and tighten all screw Q to secure.
WARRANTY We strive to offer high-orality products, and we also try our best to satisfy each and every customer that orders from us with product or service as needed. We provide 30 days warranty starting from the time you receive the item. Each customer must provide a record of their order such as the order number, or item receipt for any items that are out of the warranty period you may also still receive replacement parts by purchasing them with our company if they are available.
