HULALA H O M E ITEM NO.SP-14KSBLS0845 NOTE: This brochure contains IMPORTANT safty info. Please read and keep for future reference.
MAINTAINANCE AND WARNING 1.Keep furniture away from heat sources. 2.Do not clean furniture with harsh cleaner or polishes.Do not use detergents,solvents,abrasives,spray packs or leather cleaner. Use non-color mild soa with warm water to clean spills(Mix 1:10 soap to water). 3.Do not place furniture under direct sunlight,material will possibly fade over time. 4.Do not use on site dry cleaning machine.Children should not climb or jump on the furniture. 5.
EXPLOSIVE VIEW A F G F F G F D H H E J I C J I B K L K K K 2PERSONEN 03/29
PARTS LIST A x1 B x1 C x1 D x1 E x1 F x4 G x2 H x2 I x2 J x2 K x4 L x1 04/29
HARDWARE LIST #1 x10 #2 x12 Ø6*35mm Ø8*30mm #7 x8 #8 x10 #13 x2 #14 x2 #3 x10 M6*50mm #9 x3 #4 x68 M3.5*14mm #10 x2 #5 x10 #6 x8 Ø15*11mm #11 x4 #12 x4 #6 x1 #8 x1 TOOL LIST #15 x1 #16 x1 M6 HARDWARE SPARE LIST #1 x1 Ø6*35mm #9 #2 x1 Ø8*30mm #3 x1 M6*50mm #4 x6 M3.
ASSEMBLY INSTRUCTIONS STEP-1 Insert wooden dowel #2 into the corresponding hole of panel (A) and then screw bolt #1 into the corresponding hole of panel (A), tighten bolt #1 with screwdriver #15.
ASSEMBLY INSTRUCTIONS STEP-2 Use screw#11 to attach part#11 to the corresponding hole of toppanel(A),tighten screw#11 with screwdriver#15.And then slide therebounder#11 into the rebounder base as picture show.
ASSEMBLY INSTRUCTIONS STEP-3 Insert side panel (D)&(C)、middle vertical panel(E) into the preassemble top panel (A),and then insert cam bolt #5 into the corresponding hole of side panel (D)&(C)&middle vertical panel(E),tighten cam bolt #5 with screwdriver #15,finally stick paster #8 to it for look nice.
ASSEMBLY INSTRUCTIONS STEP-4 Use screw #4 to attach wine glass holder #14 to panel (A) ,tighten screw #4 with screwdriver #15. #15 #4 1 #14 A E #4 C D A #14 x2 #4 x12 #15 x1 M3.
ASSEMBLY INSTRUCTIONS STEP-5 Insert panel(G) into preassemble top panel(A) as picture show ，and then insert cam bolt #5 into the corresponding hole of panel (G),tighten cam bolt #5 with screwdriver #15，finally stick paster #8 to it for look nice.
ASSEMBLY INSTRUCTIONS STEP-6 Carefully align and slide panel (F) into the groove along rear edge of pre-assemble step 5,and then insert wooden dowel #2 into the corresponding hole of panel(D)&&(E)&(C).
ASSEMBLY INSTRUCTIONS STEP-7 Insert bottom panel (B) into preassemble step 6，make sure all holes aligned and then use bolt #3 to attach them，tighten bolt #3 with allen key #16.
ASSEMBLY INSTRUCTIONS STEP-8 Screw the four leg(K) onto the base plate(B),and screw the middle leg(L) onto the bottom plate(B).
ASSEMBLY INSTRUCTIONS STEP-9 Attention: Before the next step, adjust the feet of the locker to keep it level. Attention: Before the next step, adjust the feet of the locker to keep it level.
ASSEMBLY INSTRUCTIONS STEP-10 Use screw #9 to attach plastic shelf #9 to the corresponding hole of panel (A)&(D)&(G)&(E)&(C)&(B) as picture show,make sure all holes aligned and tighten screw #9 with screwdriver #15.
ASSEMBLY INSTRUCTIONS STEP-11 Nsert shelf holder #8 into the corresponding hole of panel (C)&(E)&(D)，make all shelf holder #7 same level and then attach adjustable shelf(H) to it.
ASSEMBLY INSTRUCTIONS STEP-12 Use screw #12 to attach top plate#12 to bottom plate (B) ,tighten screw #12 with screwdriver #15.
ASSEMBLY INSTRUCTIONS STEP-13 Use screw #4 to attach metal plate #11 to door (I) ,tighten screw #11 with screwdriver #15. Use screw #4 to attach hinge #6 to door (I) ,tighten screw #4 with screwdriver #15. #15 #15 #4x16 #11x2 #6x4 #11 #4 #6 #11 I I #4 x16 #6 x4 #11 x2 #15 x1 M3.
ASSEMBLY INSTRUCTIONS STEP-14 Use screw #12 to attach metal plate#12 to door (I) ,tighten screw #12 with screwdriver #15.
ASSEMBLY INSTRUCTIONS STEP-15 Use screw #4 to attach door (I) to the corresponding hole of side panel (C)&(E)，tighten screw with screwdriver #15. #15 E # x12 I C A F G H G E #4 H D F K B I F L K K #4 x12 #15 x6 M3.
ASSEMBLY INSTRUCTIONS STEP-16 Use screw #4 to attach metal plate #11 to door (J) ,tighten screw #11 with screwdriver #15. Use screw #4 to attach hinge #6 to door (J) ,tighten screw #4 with screwdriver #15. #15 #4x16 #15 #11x2 #4 #6x4 #7 #4 J #15 J #4 x16 #6 x4 #11 x2 #15 x1 M3.
ASSEMBLY INSTRUCTIONS STEP-17 Use screw #12 to attach metal plate#12 to door (J) ,tighten screw #12 with screwdriver #15.
ASSEMBLY INSTRUCTIONS STEP-18 Use screw #4 to attach door (J) to the corresponding hole of side panel (E)&(D)，tighten screw with screwdriver #15. #15 # x12 I A F H IF #4 J D J C E B L K K K #4 x12 #15 x1 M3.
ASSEMBLY INSTRUCTIONS STEP-19 Key: 1.Short press: Cycle switch white light, warm light, neutral light. 2.Long press: When the light is on, press the button to adjust the brightness without releasing it. Release the button to lock the brightness. Key: 1.The initial state is off. 2.Press the first button to enter the steady state. (Induction function does not work in steady on mode and will not be automatically extinguished) 3.Press the second button to enter night mode.
ASSEMBLY INSTRUCTIONS STEP-20 After adjusting the induction lamp #13 to your favorite light source, as shown in the figure,remove the back protective layer and attach the induction lamp #13 to the panel(A).
ASSEMBLY INSTRUCTIONS #15 x1 ① x2 #10 ⑤ x2 x4 STEP-21 Use nylon packaging #10 Inside screw ⑤ to attach bracket ① to the corresponding hole of top panel(A)，tighten screw with screwdriver #15.
ASSEMBLY INSTRUCTIONS #15 x1 #10 ① x2 x2 ② ③ x4 x4 STEP-22: 1.Mark the position on the wall, that corresponds to the location of bracket ① on the back of top panel A; Drill and insert the expandable screw ② by hammer. 2.Assemble the bracket ① to the wall. Align the hole in the bracket ① with the expandable screw ②, use screw ③ to attach it， tighten screw ③ with screwdriver#15. 1. L AL L W L A W ① ③ ① 2.
ASSEMBLY INSTRUCTIONS #10 x2 ④ x2 STEP-23 3.Let the plastic belt ④ pass through bracket ① and pull tightly.
WARRANTY 1.We strive to offer high-quality products,and we also try our best to satisfy each and every customer that orders from us with product or service as needed. 2.We provide 30 days warranty starting from the time you receive the item.Each customer must provide a record of their order such as the order number,or item receipt for any items that are out of the warranty period you may also still receive. 3.Replacement parts by purchasing them with our company if they are available.
