Instructions / Assembly

WALL
WALL
WALL
WALL
1: 2: 3:
⑨
①
x4
①
x4
x4 x2 x4
x1
⑫
⑫
⑪
⑩
⑨
⑬
⑫
A
⑫
⑩
⑪
⑬
⑨
STEP13
: Install the anti-collapse device.
1. Mark the position on the wall, that corresponds to the location
of part ⑫ on the back of panel J; Drill and insert the expandable
screw ⑩ by hammer.
2. Assemble the part ⑫ to the wall. Align the hole in the part
⑫
with the expandable screw
⑩, screw⑬ in and tighten by
screwdriver.
3. Let the plastic belt
⑪ pass through the both part # ⑫ and pull
tightly.
J