Parts List A 1PC B 1PC c FF 1PC Left armrest D = 1pC Right armrest E O PCS Vertical Back Support F PCS Front Legs 6 = 1PC Front Leg Cross Beam H = 1PC Rear Seat Slat
STEP 1:Place seat B on clean padded surface, use Philips head screw driver (excluded), screw AA, to attach rail H to the seat frame, make sure end of rail align with seat frame properly then fasten to secure. STEP 2:Use Allen key EE, open wrench FF, bolt & nut BB, to attach front legs F to the seat frame, Please don ~ t tighten any bolt until STEP 6.
STEP 3:Use Philips head screw driver (excluded), screw AA, to attach front stretcher G to left and right legs F, make sure end of stretcher align with legs properly then fasten to secure. STEP 4:Use Allen key EE, open wrench FF, bolt & nut BB, to attach back support E to the seat frame, Please don ~ t tighten any bolt until STEP 6.
STEP 5:Use Allen key EE, open wrench FF, bolt & nut BB, to connect armrest C/D with front legs F STEP 6:Use Allen key EE, bolt CC, to connect back support E with bottom rail of chair back A, use Allen key EE, bolt DD te connect rear armrest D with middle back rail of chair back A. Make sure all parts connect properly then fast all bolts to secure. Assembly completed.
