Instructions / Assembly

Table Of Contents

9 16

ASSEMBLY

INSTRUCTIONS

Preparing the part 1 and part 3, 4.

1) Align the hole in part 1 , insert the part D(wooden dowel) into the hole by hand;

2) Align the hole in part 1, 3 and 4, screw in the cam

bolt A into the hole and tighten by screwdriver R.

Assemble the part 1,3,4, and 13

1) Align the hole in part 13 to the cam

bolt A in part 3 and 4, insert the cam

bolt A , then put the NUT B into the hole

as the picture show, screw and tighten

the nut by screwdriver R. then.

2) Align the hole in part 3 and 4 to the

part A and D in the part 1, insert the

part A and D into the hole in part 3,4,

put nut B into the hole and tighten by

screwdriver R.

3) Use part J to cover the nut B for good looking.