Instructions / Assembly

Table Of Contents

13 16

Assemble drawer to the cabinet

1) Find the moving part in male metal slider in drawer sides(pre-assmbled ), be sure

the moving part is in the back of metal slider as the picture show;

2) Find the moving part in female metal slider in the cabinet side(pre-assembled), be

sure the moving part is in the front of metal slider as the picture show.

3) Align the male metal slider to the moving part in female metal slider, then push

forward while two male sliders are in the moving part in female at the same time.

4) You can adjust the drawer to fit the cabinet once you need to do this. just loose the

screw E , you can move the male metal slider to the position you expect, then fully

tighten screw by screwdriver R.