Instructions / Assembly

16
10
7
8
Connect the part 5 to the finished part in step 6.
1) Align the groove in part 1, 3,4, insert and slide the part 5 into the
groove as the picture show.
2) Align the hole in part 3 and 4, insert the part D into the hole by hand.
Connect part 2 to the finished part in step 7.
1) Align the hole in the part 2, insert the part D in part 3,4
into part 2 , then.
2) Screw in the screw C and tighten by ALLENKEY K.