Instructions / Assembly

8 6
N x8
B x8
15mm
B*4
2.
N
N*4
B
1.
1
3
4
A
M6*35mm
x8
A
D*4
A*4
1
Preparing the part 1.
1) Aligh the hole in part 1.
2) Insert the wooden towel D into the pre-drilled hole by hand;
3) Screw in the cam bolt A and tighten by screwdriver.
Connecting part 3,4 to the part 11.
Align the hole in part 3 and 4, screw in the cam bolt
A and
tighten by screwdriver
1)
Insert the nut B into the hole in part
11;
2)
Insert the cam bolt
A in part 3,4 into the nut B in part 11 fully;
3)
Screw and fully tighten the nut B by screwdrive
r.
4)
Cover the nut B hole by part N.
Connect the part 1 to the finished part in step 5.
1) Insert the nut B into the hole in part 3 and 4 as the picture show;
2) Insert the wooden dowel into the hole in part 3, 4; insert the
cam bolt A into the nut B at the same time; then tighten the but
B by screwdrive
r.
N
2.
1.
B
4
3
N*4
B*4
11
4
3
A
A*4
D
x4
8*30mm
Preparing the part 3 and 4.