Instructions / Assembly
7
10
X2
10
7
N
x8
B
x8
15mm
8
9
8
9
Installing the part 10
1) Align the grooves in part 7,8 and 9; then
2) Insert and slide the part 10 into the grooves completely.
Connect the part 6 to the finished part in step 3, and preparing the part 1 after .
1) Align the hole in part 7, 8; then
2) Insert the nut B into the hole in part 7,8 as the picture show.Be sure the arrow on
the nut B towards the hole where the cam bolt A will come in!
3) Insert the cam bolt A into the nut B fully and tighten the nut B by screwdriver.
4) Cover the nut B hole by part N