Instructions / Assembly
13 6
13
x1
IH
x2x1
4*35mm
Q
G
x2
1
1.
I
X2
I
G
3.
I
G
Q
2.
Q
H
Installing the ANTI-COLLAPSE DEVICE
1) Mark the position on the wall( the height must be same to the height of
part Q on the back of cabinet, part Q finished in step 12);
2) Use driller dig a hole(driller must be 0.315in), then push the part I into the
wall by hammer(not provided) till it even with wall;
3) Align the hole in part Q to the hole in part I, and screw in the screw G
and fully tighten by screwdriver.
4) Iet the belt H go through the part Q in cabinet back and on the wall,
tighten them to secure safe.