Instructions / Assembly

E
E
E
2.
1.
6
6
Install the drawer into the cabinet.
1)Move the slider-part in female metal slider to the open-end of
cabinet as above middle picture show; then
2) Align the male metal slider in part 7, 8 to the female metal slider
in part 3,4, insert the male metal slider into the slider-part of
female metal slider slowly for both at the same time, then push
forward when be sure they are all in position.
3) IN CASE the drawer doesn't fit the canibet frame, you can adjust
the female metal slider to make the drawer fit by loose the screw E
and move female metal slider up or down (according to your
situation), then tighten the screw E by screwdriver.