Instructions / Assembly

Assembly Instructions
ITEM NO: LBL5260
No.
Parts
Quantity
1
1
2
1
3
2
1.Remove all parts from the carton and place them
on a protected surface or carpet. Take out the
back（2） and wings (3) out of the package.
3. Attach the back cushion (2) to the seat cushion (1) by sliding the
receivers into the mechanism posts located on the seat cushion (1).
From the back of the recliner, press down on both sides of the back
cushion (2) to firmly secure. The back cushion (2) and seat cushion (1)
will automatically lock into place. Then pull the back flap down tightly
and attach the back flap to the bottom of the seat cushion (1).
4. Attach the back wings (3) to the back body. Make sure the male and female brackets align as shown. Make sure the left/right
side wing matches each side correctly, and left/right wings set leveled.
Correct side view
Correct back view
2. Turn over the seat (1), find 4 ribbons
tied as photo shown, and cut them off to
let the swivel base free.
LEFT SIDE FACING WING
RIGHT SIDE FACING WING