Instructions / Assembly

16
6
9
18
18
19
7
Place assembled unit side down on
clean padded surface, insert wood
dowel D to edge of part #3.
Use philips head screw driver to fasten
cam bolt A to bottom of part #3.
Insert wood dowel D, fasten cam bolt A
into end holes on part #6/#9, insert cam
lock into part #6/#9 then use philips
head screwdriver to fasten cam lock to
secure part #3 with part #6/#9 and use
sticker O to cover the cam lock.
Insert part #19 to side hole on part #18.
Use screw C and allen key H to attach the whole handrail to
part #7. Fasten screws to secure.