Instructions / Assembly

STEP 8, attach the panel J and K to the cabinet frame finished.
1.Align the hole in the hardware part #④ to the cabinet as the
picture show.Screw in and tighten screw #⑤ by screwdriver#
⑫.
2.Attaching the contactor in panel J and K as the
picture show.
STEP 9, install the ANTI - COLLAPSE DEVICE.
1.Install the hardware #⑬ on the back of panel A, installing the
same one and the same height on the wall.
2.Connect and tighten by pulling plastic belt to make security.
3.Now your cabinet is ready to use.
④
⑤⑫
③
⑫
⑬