Instructions / Assembly

ASSEBMLY INSTRUCTION

HOCTXSO287

Hardware list

No Drawing Specification Qty

M6x15mm 48pcs

Dia 20x14mm 48pcs

Allen Key 1pc

Extra Parts

No Drawing Specification Qty

M6x15mm 1pc

Dia 20x14mm 1pc

Adjustable

leveler

1pc

STEP 1

Place seat/back frame A upside down on

clean padded surface, use allen key #3, flat

washer#2, bolt#1 to attach leg D/E/F on bottom

of seat frame, fasten to secure.

STEP 2

Place seat cushion B and back cushion C

on seat/back frame. Assembly completed.

Adjust levelers under legs to set the seat level

PAGE 1
ASSEBMLY INSTRUCTION HOCTXSO287 Hardware list No Drawing Specification Qty 1 M6x15mm 48pcs 2 Dia 20x14mm 48pcs 3 Allen Key 1pc Extra Parts No STEP 1 Place seat/back frame A upside down on clean padded surface, use allen key #3, flat washer#2, bolt#1 to attach leg D/E/F on bottom of seat frame, fasten to secure. Drawing Specification Qty 1 M6x15mm 1pc 2 Dia 20x14mm 1pc 3 Adjustable leveler 1pc STEP 2 Place seat cushion B and back cushion C on seat/back frame. Assembly completed.
PAGE 2
ASSEBMLY INSTRUCTION HOCTXSO287 Hardware list No Drawing Specification Qty 1 M6x15mm 12pcs 2 Dia 20x14mm 12pcs 3 Allen Key 1pc Extra Parts No STEP 1 Place top frame G upside down on clean padded surface, use allen key #3, flat washer#2, bolt#1 to attach leg I/J on bottom of top frame G, fasten to secure. Drawing Specification Qty 1 M6x15mm 1pc 2 Dia 20x14mm 1pc 3 Adjustable leveler 1pc STEP 2 Ture the table unit upright. Carefully place glass top H on top of top frame G.