ITEM NO. DKHN0066-1 NOTE: This brochure contains IMPORTANT safty info. Please read and keep for future reference.
WARRANTY We strive to offer high-quality products, and we also try our best to satisfy each and every customer that orders from us with product or service as needed. We provide 30 days warranty starting from the time you receive the item. Each customer must provide a record of their order such as the order number, or item receipt for any items that are out of the warranty period you may also still receive replacement parts by purchasing them with our company if they are available.
MAINTAINANCE AND WARNING Keep furniture away from heat. Do not clean furniture with harsh cleansers or pol ish. Do not use detergents, Solvents, abrasives, spray packs or leather cleaner. Use non-color mild soap with warm water clean spills(Mix 1:10 soap to water) Do not place furniture under direct sunlight, material will possibly fade over time. Do not use on site dry Cleaning machine. Children should not climb or jump on the furniture.
PARTS LIST 13 12 7 8 9 14 6 11 20 Front bottom 10 14 19 18 17 21 19 20 14 19 18 21 20 22 x3 16 18 15 21 2 3 4 1 3 Check all parts according to parts and hardware list make sure all parts present before assembly as some small parts may come loose during transit. Place all parts on clean padded surface and line up according to sequence of assembly.
HARDWARE LIST A M6x15 B ∅7*36 C 1pc 12pcs G 4mm H ∅8*30 D 6pcs I 8pcs 46pcs M6x35 ∅3.5*14 E 3pcs J ∅4*40 F 3pcs 16" K 12pcs 24pcs 1/4*38 ∅15*12 46pcs L 3pcs M6*25 6pcs M 6pcs SPARE EXTRA PARTS A M6x15 C 1pc J ∅4*40 1pc M6x35 F 1pc L M6*25 1pc ∅15*12 1pc G ∅7*36 1pc H ∅8*30 1pc I ∅3.5*14 3pcs M 1pc Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during shipment.
ASSEMBLY INSTRUCTIONS open and place all parts on a clean, no-marring surface. STEP 1: Ax12 A B 3 3 4 1 Use bolt A and allen Key B to connect stretchers 3 and 4 with side frames 1&2. Make sure all parts sets leveled then fasten all bolts to secure.
ASSEMBLY INSTRUCTIONS STEP 2: Ix24 Kx3 12 7 6 K I 11 Use wood screw I and philips head screw driver to attach drawer slides K to end panel and partition 11&12&6&7.
ASSEMBLY INSTRUCTIONS STEP 3: G Fx2 Gx2 Jx12 8 F 7 6 J 8 t on Fr 10 9 48 33 Turn the center partition 6&7 upside down,use philips head screw driver to fasten bolt F on inserts of back panel 8, bottom panel 9&10, then insert the bolts G on back panel 8 through end holes of center partition 6&7, put on cam unit F and fasten to secure. Use philips head screw driver and wood screw J to attach bottom panel 9&10 to bottom edge of center partition 6&7.
ASSEMBLY INSTRUCTIONS STEP 4: Fx10 Gx10 G 11 12 12 F 10 9 11 Use philips head screw driver to fasten bolt G on inserts of end panel 11 & 12, back panel 8, then insert the bolts G on end panel 11 & 12 through end holes of bottom panel 9 & 10, put on cam unit F and fasten to secure.
ASSEMBLY INSTRUCTIONS STEP 5: G Fx16 Gx16 Hx8 H 13 F 13 Use philips head screw driver to fasten bolt G on inserts of table top 13, Insert all dowels H to holes on back side of table top 13 then insert the bolts G on table top 13 through end holes of end/back/bottom panels assembly (6&7&8&9&10&11&12), put on cam unit F and fasten to secure.
ASSEMBLY INSTRUCTIONS STEP 6: Cx6 C Use philips head screw driver and bolt C to attach the metal frame assembly to bottom of upper unit, make sure all edges align then fasten to secure.
ASSEMBLY INSTRUCTIONS STEP 8: 17 16 15 Pull out the drawer slides and carefully align the pin on drawer slides with the hole on drawer box then fix the clip to secure the drawer. Whenever drawer adjustment of drawers needed, please spin the pin on drawer slides to set it level.
ASSEMBLY INSTRUCTIONS STEP 9: Mx6 M Switch the button with hand to slightly adjust the height of drawer sides in order to sent the drawer leveled. Insert the plastic clip M through the slide to the hole on drawer sides.
ASSEMBLY INSTRUCTIONS Assembly completed.
