Instructions / Assembly

Installation Instructions:This tip restraint must be attached to a wall stud using the 2"screw enclosed:1.Attach a bracket
securely to the back top rail of the fumiture using the 5/8"scrrew provided, through the smaller hole.2.Locate the other
bracket on the wall over a wall stud and 2 inches below the mounting bracket secured to the back of your unit Attach to
the wall stud using the 2"screw provided, through the smaller hole.3.Place the furniture into postion so both mounting
brackets are vertically in line. 4.Lace the end of the restraint strap through the larger hole in each mounting bracket.Bring
both ends together and slide the flat and through the locking end and draw it through until all slack is removed.5.Confirm
that the strap is securely laced and locked.