User Manual For correct usage, please read these instructions carefully and keep in a safe place for future reference! Contents 1. General Safety Instructions …..…………….…............…1 Important safety precautions ……..………….…....……..1 2. Package contents ……………..………………….…..…….3 3. Product description ………………..………………...……..4 4. Using the film holders …………………..................……..7 5. Getting started ……..………..………........…........…......9 6. Operation Guide …………..…………….......……………11 1: Capture …….……...………………...
Congratulations on the purchase of your photoframe film scanner. Before operating it, please take some time to read this manual thoroughly and keep it for future reference. Follow these important safety and operation instructions. 1. General Safety Instructions Important safety precautions • • • • • • • • • • • The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed over the product. Dry location use only.
• • • • • • The device should be situated in ventilation surroundings for proper ventilation. The unit should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings. The USB cord of the device should be unplugged from the computer when the unit does not use for a long period of time. Do not overload the USB connections on your computer.
2. Package contents The package contains the following items: ◆ ◆ ◆ ◆ ◆ ◆ Photoframe film scanner Film holder AC Adapter TV cable USB cable User manual Please contact your retailer if you have not received any of these items.
3.
• Positioning the film scanner Landscape Portrait: extend the leg at the back of the product when in this position • Film holder Front face Back face No. Part Function 1 Screen 7" color screen 2 Film entry slot Insert film here Scan button + LED Start scanning LED: 1.Red: no card or no memory left 2.Green: Ready 3.
4 Home button Return to the main menu 5 Next Button 1.Selects on the right 2.Capture mode: flip image 6 OK button 1.Enter selection 2.Capture mode: long hold (EV mode), short press (Film type mode) 7 Previous button 1.Selects on the left 2.
4. Using the film holders Slides: The light, shade and color of the slide look exactly the same as the original image. Negatives: The light and shade, color of the Negative is exactly inverted from the original image. Note: Please remove the protection film on the film holder before use. Loading single frame cartridge (not included in the package) 1.Insert the holder into the slot at the front of the film scanner. Make sure that the positive side faces to the left (front face of the holder faces left).
Loading a roll of film 1.Insert the holder into the slot from the top of the film scanner. 2.Insert the strip of slide or negative holder into the slot at the front face of the film scanner. Make sure that the positive side faces to the left. Match arrow to arrow Positive side of the film faces left 3.Insert the film parallel to the direction of entry. Please do not slant or tilt the film. 4.Pull out the film from the back in a steady manner. Note: •Handle films with care.
5. Getting started 1. Insert SD/MMC card into the film scanner. 2. Please connect the power to the film scanner and plug into a power source. • USB: Connect to PC with USB cable • 5V adapter: Connect to power socket with AC adapter and USB cable 3. Press the POWER button to turn on the film scanner. 4. Insert the Slide/Negative film into the slot on the right side of the film scanner.
Memory full indicator •Before you turn on the film scanner, you need to insert the SD/MMC card into the film scanner. Otherwise the device maybe powered off. •Do not remove the memory card when the device is powered on. Device will power off when the SD card is removed. •The film scanner has a built-in memory card for storage. When there is an external SD/MMC card, the default storage location will automatically switch to the SD/MMC card.
6. Operation Guide Home: Main menu The film scanner has four main functions: Mode Function 1 Capture Captures positive and negative film 2 Playback Plays back images stored in the internal storage or SD card 3 USB Connect Connects to PC 4 Setup Options to customize the film scanner No. 1: Capture Press OK button to enter capture mode. When the film scanner is left idle for more than 5 seconds, upon powering on, it will automatically enter capture mode. 1.
1.PREVIOUS button: mirror image 2.NEXT button: flip image The live view will be adjusted accordingly. (This step is to correct any disorientation). Mirror and Flip buttons only be functioned in the live view mode. 1.
No. Options Functions 1 Negative Film Scanning negative color film 2 Slides Scanning positive color film 3 B/W Scanning black and white film Press the OK button to switch the film types to scan. Press the SCAN button, the current image will be captured and saved to internal memory or SD/MMC card, then return to live view again. To adjust the exposure value manually from -2 to 2, press and hold the OK button for 3 seconds.
2: Playback Press the HOME button to access the main menu, then press NEXT button to choose the Playback function, and press OK button to confirm. The photos will be playback in slide show mode. 2.1 Playback: Slide show Single picture Edit mode You can interrupt (Pause) slide show mode to stand-alone playback mode (single picture playback) by pressing the OK button. Use the PREVIOUS/NEXT button to manually scroll the pictures.
2.2 Playback: Rotation In “Edit mode”, press PREVIOUS/NEXT button to select clockwise or counter clockwise icon to rotate image 90 degree respectively and press the OK button to save image. 2.3 Playback: Delete Select DELETE icon and press OK button to confirm. The current picture will be deleted and next picture will be shown. Press HOME button to exit edit mode.
3.1 USB mode/Status Once select USB mode, the film scanner will become a mass storage device and will show on the screen, it will appear as a removable disk on the PC. Open the folder to view or edit images on the PC. Press the HOME button to return to main menu. 4: Setup There are six options in setup mode: Options Function 1 Resolution Adjusts the resolution of the captured image.
4.1 Resolution Press OK button to enter into Resolution mode, and then press PREVIOUS/NEXT button to select Resolution, then press OK button to confirm. Two kind of resolution you can select: ① 5 Megapixels resolution ② 10 Megapixels resolution Press PREVIOUS/NEXT button to select resolution options, and then press OK button to confirm your choice. 4.
4.3 Format Format function is to format all photos and images inside the built-in memory and SD/MMC card inserted. Press PREVIOUS/NEXT button to select format mode, and then press OK button to confirm, press PREVIOUS/NEXT button to select Yes/No, press OK button to confirm. Notice: This operation will format your SD/MMC card! All data will be erased! 4.4 FW Upgrade New firmware will be provided to enhance the function of your film scanner if needed.
4.5 Default Press PREVIOUS/NEXT button to select default mode, and then press OK button to confirm, press PREVIOUS/NEXT button to select Yes/No, press OK button to confirm. This option will revert back to factory settings. 4.6 Version Info Press PREVIOUS/NEXT button to select Version Info mode, and then press OK button to confirm. This option will show version information similar as following.
7. Connecting to a TV You can browse images on a TV. 1.Turn on the film scanner and TV 2.Connect the film scanner to TV with the TV cable 3.Press the PREVIOUS/NEXT button to TV mode. 4.
8. Troubleshooting Question: There is unwanted stripe appearance at the edge of the image. Answer: If it is slight stripe, move the slide holder gently to and fro in the device until the stripe is no longer visible in the preview window. If the stripe is still exist, please contact with our retailer. Question: The device cannot connect to the computer. Solution: Please check if the cable has already connected to the USB port of the computer. Or connect the cable to another USB port.
9. Cleaning & Maintenance Clean the film scanner periodically after use. The film scanner should be cleaned using a compressed air canister to remove the dust from the internal chamber. 1.Insert the end of straw from the compressed air into the door flap on the right side so that it opens. 2.Gently blow out any dust on the inside of the device. Note: The compressed air canister is not included with the device but it can be purchased from an office supply or electronics retailer.
10. Technische Daten ◆Lens ◆Sensor ◆Focus Range ◆LCD ◆External memory ◆Exposure ◆Color balance ◆Scan high resolution ◆Data conversion ◆Scan Method ◆Light source ◆Power F/4, f=3.93 5.1 mega pixels CMOS sensor 51.5mm 7"TFT SD/MMC card Auto Auto 10M pixels interpolation resolution 12 bits per color channel Single pass Backlight (3 white LED) Powered from USB /5V adapter with USB cable ◆Interface ◆Dimensions ◆Weight USB 2.0 216.5mm(L) x132.
