Operation Manual

13
When the picture is in static state, you can press [Fast Forward Button] to rotate
the picture clockwise and press [Fast Reverse Button] to rotate the picture
counter-clockwise.
Play MP3/JPEG Disc
When playing the disc with MP3 files and JPEG files mixed up, you can press [Right]
to move the cursor to the mark of browsing pictures and press [Enter] to enter
picture-browsing state while playing MP3 files.
Press [Right] again to enter JPEG play menu and then press the [Right] for the third
time to select the picture-play mark on the lower right corner. At this state, you can
select either MP3-play or JPEG-play directly.
Select a picture in the JPEG directory menu and press [Play] to play pictures in
order.
Read USB disc and SD/MMC Cards
1. Insert USB disc into the USB interface on the upper right corner or Insert the
card (SD/MMC) into the card slot of the player.
2. Turn on the power - play.
3. You can download MP4 / MP3 / JPG / VCD files into a USB disc to play back.
Note: 1) USB disc and SD/MMC Cards must be played at no disc state so that
the device can detect the USB disc, or SD/MMC cards and then play.
2) Support USB 1.1 to 2.0 standards.
3) DVD can not be played smoothly because the DVD format is not
supported.
Playing Games
1. Insert an 8 to 32-bit game disc into the player.
2. Connect the control pad to the Game Control Pad Socket.
3. Turn on the power, select a game, and start playing.
Note: 1) For first-time using, you should use the remote control to enter the
game.
2) [Number Buttons] and [Previous/Next] on remote control can be
used for page turning and selecting games. Press and hold [Start]
on the game control pad and press [Select Button] at the same
time to return to the main menu.