Operation Manual

Pow

Men

Basic Operation

er Operation

Connect the power adapter with either 220V or 110V power supply, switch the

[Power] to ON, and wait for 3 seconds to turn on the device. The device displays

the latest shutdown state. Switch to the mode you prefer by mode button.

Press [Setup] to enter setting menu interface, select the appropriate function from

the menu setting. The item in brighter color indicates as the selected one, and

press [Enter] to confirm.

u Setup

Press function menu setup button to setup AV OUT, Screen Subtitle, the original

setting etc. Press [Enter] to confirm.

System Setup

1. Screen Saver: Select Screen Saver and press [Direction Button] to enter

screen saver setup menu, which can be set as On / Off. Start the screen saving

function to enable screen saver when the player is in stop/ open-cabinet/no-disc

modes or the picture keeps in static state for around 60 seconds.

2. Video output (CVBS): Composite audio and video output by connecting the player

to TV with a dedicated cable to enjoy better resolution.

Note: Only the AV cable identical to the special cable provided by the

manufacturer shall be used.

3. Password:

The initial setting for this item is Password lock mode, neither Rating

can be selected in this mode, nor the password can be modified. If Rating needs

to be set up, you need to press [Number Buttons] to enter the initial password of

this player: 0000, then press [Enter] to setting Rating. If you want to modify the

password, enter the old password first, then enter the new password before press

the [Enter] for confirmation (The valid password shall be in four digits.)

4. Rating: When playing the discs with lock function, you can select the appropriate

age level control according to disc level and your need. The control level is listed

from high to low. Level 1 is the lowest level, and level 8 is the highest. The function

is only applicable for discs with rating restrictions, which can only be set when the

coded lock is activated by setting password, and the coded lock needs to be